Can run 33 Inch tires on factory 20 Inch wheels. Provides highly sought level stance. High clearance crossmember design gives unmatched ground clearance.

Requires no modification to the stock drivetrain or exhaust. 100 percent precision laser cut materials using the latest computer aided design process. No need to disassemble your struts to install Re-uses stock front skid plate.

Includes application valved V2 Monotube series shock absorbers which offer the best in balanced performance for on and off-road use.

Features:

• Can run 33 Inch tires on factory 20 Inch wheels.
• Provides highly sought level stance.
• High clearance crossmember design gives unmatched ground clearance.
• Requires no modification to the stock drivetrain or exhaust.
• 100 percent precision laser cut materials using the latest computer aided design process.
• No need to disassemble your struts to install
• Re-uses stock front skid plate
• Includes application valved V2 Monotube series shock absorbers which offer the best in balanced performance for on and off-road use.

Notes:Requires minor cutting and drilling. Does Not fit 2007 Classic models. 18 inch or larger wheels are Required. Please view installation instructions for complete information on proper tire/wheel combinations.

Details:

Details:

• Sold As Kit
• Drive 2WD
• Tire Info ¹295/70 R17:Factory 17:-- 305/70 R17:17x9:-:+12 to +18mm ¹²285/65 R18:Factory 18:-- ²305/65 R18:18x9:-:+12 to +18mm ¹²295/55 R20:Factory 20:-- ²305/55 R20:20x9:-:+12 to +18mm ¹ Factory 18.0 inch and 20in wheels can be run but require 1/4.0 inch wheel spacers with 295 tires ² Models equipped with Factory 18-inch or larger wheels must run 18-inch or larger wheels if changing to aftermarket wheels
• Max Tire 33.0 inch
• Lift Height 5.0 inch
• Front Components Lifted knuckles Front crossmember Rear crossmember Upper strut spacers Brake line brackets Sway-bar drop brackets Hardware
• Rear Components 4.5.0 inch fabricated lift blocks U-bolts Hardware